Park Tool mounting stand PRS-30LB

A surprising and original solution from Park Tool for a simple mechanical bike stand, and especially heavier electric bikes. The clamp lift is provided by a mechanical gear that is operated manually by turning the crank or (for those of us who are older or prefer convenience) with a cordless screwdriver.
In the lower position, the clamp is at a height of 74 cm, which allows you to attach most bicycles/e-bikes behind the seatpost or top tube of the frame without having to lift the bicycle/e-bike.
The stand does not have a base. It can be anchored to the floor using a small board or screwed to a large board (in which case it is self-supporting).

Parameters:
Maximum load/capacity: 54 kg (120 lbs.)
Stand weight: 18 kg (without board)
Clamping range: 23 to 76 mm (7/8" to 3") ... round and aerodynamic tube profiles
Clamping jaw length: 70 mm (2.75")
Clamping height adjustment: continuous in the range of 74 to 132 cm (29" to 52")
Alternatively, the height adjustment can be reduced by 10 cm to a range of 64 to 122 cm (25" to 48").

The connection to the cordless screwdriver is 6HR 10 mm. Do not use the drilling function, but tighten using the slip adjustment (in case the clamp reaches its end position).

Product ID: 30313