Force charging stand SOS E-BIKE, 4P-2U, 1B, 1Bs+1Z

FORCE SOS E-BIKE charging stand

An ideal solution for cyclists and the general public. It is used for charging electric bicycles and for basic maintenance of bicycles, electric bicycles, scooters, strollers and wheelchairs. We recommend installation in a location that is under camera recording.

KEY FEATURES:
The charging station offers the possibility of charging the battery away from home without having to carry your own (heavy) charging cable.
It offers the possibility of charging up to 90%. The 10% station is equipped with a 230V socket (charging with its own charging cable).
Possibility to charge up to 5 electric bicycles simultaneously.
It takes approximately 30 minutes to charge a 400 Wh battery from 10% to 30%.
Negligible electricity consumption (0.5 - 1 SKK per charge)
Tools for basic service maintenance
Air pump with pressure gauge for inflating the inner tube of a road bike
Compact and robust design for outdoor/indoor use

BASIC SERVICE TOOLS:
aluminum workshop pump FORCE PROFI STAR with pressure gauge up to 11bar (160 PSI)
for all types of valves - (AV) aluminum mounting lever
1x pedal wrench 15 with 6/8 hex key
1x adjustable open-end wrench, for nuts max. 24mm
1x torx three-sided T20/ T25/ T30
1x three-sided hexagonal wrench 4/ 5/ 6 < / 3 - 1x center wrench Fe 3.2/ 3.3/ 3.4/ 3.9 - 1x cross screwdriver
1x flat screwdriver
1x combination wrench for disc brake service
1x riveter, workshop

stand and charging with black reflective stickers
the back of the stand contains a label with a QR code
The label is supplied in Slovak - an English/German version can be supplied for a fee
The QR code on the label links to instructional videos for individual repairs


Technical parameters steel
Surface treatment: powder coating (RAL)
Construction thickness: 3 mm
Dimensions (w x h x d): 450 x 1320 x 660 mm
Wire material: galvanized
Stand weight: 40 kg
Load capacity 3 steel, 450 x 350 mm, 4 mounting holes

Technical parameters of the console:
Construction material: structural steel
Surface treatment: powder coating (RAL)
Construction thickness: 4 mm
Dimensions: 19 console: 10.5 kg

Technical parameters of the charging station:
Construction material: plastic switchboard
Dimensions (W x H x D): 250 × 350 × 160 mm
Weight: 4.5 kg
CY Power cable
Residual current circuit breaker: yes
230V socket limitation: max. 5 A (1 socket)
Voltage tolerance: -10%+10% 230V AC
Installed power input max.: 1.5 kW
Input fuse: max. 16 A
IP54
Standards: IEC 61851-1, EMC, RoHS
LED indication: 4x blue LED (charging/not charging), 1x green LED (=device is/is not in operation)
Locking: 2x key, padlocks
Output: 2x XL Smart

The charging station is intended only for charging electric bicycles and electric scooters.
Connecting a device with a current draw higher than 5A (electric cars, lawnmowers, caravans, etc.) may damage the station.
The charging station must be switched off using the main circuit breaker when the ambient temperature drops below 5°C.
First, the connector is inserted into the port on the station and then into the connector color="#000000">
Electric bike charging cables:
- "A" XLR 3M
- "B" Jack 21 with reduction
- "B" Jack 21
- "D" RCA
- "E" Bosch
- "F" Bosch Smart

Product ID: 27479