Effetto Mariposa Shelter ZeroDue A4, - frame protection from damage

Shelter ZeroDue is a very thin (0.2 mm) and light polymer protection.

It easily adapts to difficult geometries and has incredibly high abrasion resistance.

Ideal accessory for Shelter Off-Road (1.2mm) and Shelter Road (0.6mm).



Unleash your creativity (or download our templates!)

Instead of providing pre-cut kits, we have decided to offer the Shelter ZeroDue as A4 sheets (with a layer of replaceable printing paper): you can download the pdf cutting guide (below), print it directly on the Shelter ZeroDue A4 (with any inkjet printer) and cut out. The printing layer of paper can then be removed and the Shelter ZeroDue element glued to the frame.

Printable paper is marked with a yellow stripe.


https://www.effettomariposa.eu/wp-content/uploads/2017/12/Template_ShelterZeroDue_roadkit.pdf

https://www.effettomariposa.eu/wp-content/uploads/2017/12/Template_ShelterZeroDue_downtoptube.pdf

https://www.effettomariposa.eu/wp-content/uploads/2017/12/Template_ShelterZeroDue_xcsuspensionfork.pdf

https://www.effettomariposa.eu/wp-content/uploads/2017/12/Template_ShelterZeroDue_blank.pdf



The shape of the frame protection can also be outlined with a pencil or you can simply cut it as you like.



The use:

After removing cables or other distractions, clean and degrease the area where you want to use the Shelter.

Select the desired Shelter ZeroDue shape and remove the paper for printing.

Peel off the protective liner of the Shelter to release the adhesive surface. Apply in place and smooth from the center towards the edges.



At only 12.8 grams per full A4 sheet (210 x 297 mm), the Shelter ZeroDue weighs just 0.02 grams per square centimeter!



Shelter also acts as protection against UV radiation.



Packaging:

"Shelter ZeroDue A4" contains two sheets, A4 format.

Product ID: 20548

Weight: 100 g