TATZE LINK Titan - ultra flat, super light and mega grip!
The LINK Titan pedal is an extremely thin flat pedal. Large platform with 112 cm2 (113x99mm/LxW). 40 pins with a targeted camber ensure enormous grip and a good connection between the pedal and the shoe. To further increase the grip or maximize the contact area, 4 additional pins can be screwed on each side. LINK pedals avoid unwanted contact with the ground thanks to their extremely thin design. The pedal body measures just 8.8mm at the exposed outer edge, making LINK pedals one of the thinnest pedals on the market. The open design allows dirt to fall through the pedal, making the pedal light at only 298g. The LINK pedals have quality bearings with an IGUS JSM sliding bearing and 2 ball bearings. For sealing, 2 double edge sealing rings are installed to protect the bearings from dirt and moisture. The bearing and sealing unit makes the pedal sustainable in terms of longevity.
Specification in a nutshell:
Flat side with 10 pins (possibility to add 4 more pins)
A large platform with a targeted pin lift
Pedal body made of aluminum 6061-T6
Titanium axle (approved for riders up to 90 kg)
Bearings: IGUS sliding bearings and 2x ball bearings (multiple sealed)
Weight: 298 g
Included in the package: pedals and spare pins with a key
Developed and tested in Tyrol/Austria
Instructions for use for Tatze pedals
A) Connecting the pedals to the crank
The right pedal connects clockwise and the left pedal counterclockwise.
1. Lightly apply grease to the thread of the pedals.
2. Connect the axle with the thread to the crank and tighten the pedal to a torque of 33 Nm using a 6 mm Allen key.
Product ID: 17825